9 April 2020

Creating a Split-tunnel user in PiVPN

Okay. So we’ve gone over creating users. In doing so we’ve gone over creating a user that would have a “full” vpn by using the default configuration that happens when you create a user with PiVPN…. But how do we set up a user with a “split-tunnel” vpn, in which only traffic destined for your home network goes thru your RPi?

What exactly is this “split-tunnel”? In a split-tunnel VPN, the endpoint device will be able to make a determination as to where to route it’s traffic, due to changes in the configuration rules. It will route traffic to your home network over the VPN, while routing all other traffic directly out to the Internet.

This split-tunneling actually my ideal setup. It is also ideal if you just wish to use just your Pi-Hole for DNS queries when you are not at home.

Because PiVPN makes things so easy, I currently just create two profiles for my devices. One full and one split-tunnel. However, I seem to be primarily using only the split-tunnel. So who knows… I’ll probably change this practice of mine in the future and just create the one profile, but for now I’m keeping both.

Okay. I’ve talked long enough about split-tunnels. How do we make this magic happen? Lets dive in…

We will add a user just as we did previously, then edit it’s configuration file to allow for the split tunnel. To add your split-tunnel user, type the following command below.

pivpn add

Then add the name of your split-tunnel user.
In my example, my user is named “P-W-W-F-split”

The next step is to open and edit the configuration file with the followign command.

sudo nano /etc/wireguard/configs/P-W-W-F-split.conf

A full tunnel will have the line:

AllowedIPs = 0.0.0.0/0, ::0/0

That is the line we want to change. The split tunnel config would be modified to show the subnet of your home network. This is the magic line that makes this a split-tunnel.

AllowedIPs = 192.168.1.0/24

*Note: It’s been mentioned in the comments that for this split tunnel to work correctly, folks have had to also add the VPN network’s range to the allowed networks for things and work as expected. That updated line is:

Allowed IP addresses: 10.6.0.0/24, 192.168.1.0/24

I’m not going to re-edit the images as I am no longer using this as my VPN solution. I only wanted to leave this note here for those that are following thru my tutorial so that they don’t become stuck.

The updated configs can be copied to the home config directory if you choose. This will make it easier if you are going to manually transferring a config file to a device, but I usually don’t, and just use the QR code mention in the next article.

To copy or backup your configuration files use the following command:

cp /etc/wireguard/configs/P-W-W-F.conf /home/pi/configs/P-W-W-F.conf
cp /etc/wireguard/configs/P-W-W-F-split.conf /home/pi/configs/P-W-W-F-split.conf

Next Article in this series: Part 6: Setup PiVPN Endpoint Device

Category: Linux, RaspberryPi, Raspbian, VPN | 12 Comments on Creating a Split-tunnel user in PiVPN
7 April 2020

Installing PiVPN

So I already have PiHole installed at home and it works great to block ads at home. But if you’re not at home, how do you to block ads? What about if you want to access resources you have at home (i.e. – printers, file storage, remote support of non-tech-savvy family) while you are away? Well the answer is PiVPN.

You’ve probably heard of VPN services before or you might already use one. They are common for work places to use, to connect back to your office. As well as for individuals looking to bypass geo-location filters when you are overseas, to make it appear that you are in the U.S.

VPN actually stands for virtual private network. What that means is that when you connect to a VPN, you are essentially creating a secure encrypted tunnel from your device to the network on the other side. A VPN prevents “snooping eyes” from seeing the actual network traffic that crosses the wire, meaning that you only you and the other end know what you are doing. The caveat to that, depending on how your VPN is set up, is that the internet traffic on your device will appear to be coming from the network you are VPNed into and that will be visible to the ISP. So don’t think that just because you setup a VPN on your Raspberry Pi at home that you can blindly surf the Internet and download illegal torrents without consequence, because you’d be wrong. The best use case, in my opinion, for setting up a VPN, or in our case PiVPN, is to access your files and storage when you’re not at home.

Lets get started with setting up PiVPN.
As a prerequisites, make sure that you have already installed and setup PiHole.

Open a terminal window or SSH into your Raspberry Pi (RPi)

Enter the following command:

curl -L https://install.pivpn.io | bash

By running the above command essentially piping the curl command to bash, the RPi will automatically download and run PiVPN.

A cautionary note about piping curl to bash – Basically, be sure you trust the source, because you’re essentially letting them run whatever they want on your device!

The PiVPN Automated Installer should appear. Click ‘Ok’.

The installer will need to apply a static IP address to your Raspberry Pi. This is a PiVPN requirement. If you’re running PiHole, you should already have a static IP assigned to your device. If you don’t… go fix that now, and come back.
If you do already have a static IP address assigned at this screen, click ‘No’.

Comment on the above step… Even if you set a static IP on the device, if that IP is within the DHCP reservation pool, the DHCP server (the router, for most people) could theoretically still assign that IP to another device. That should never happen for an always on device, but if you take it offline for a while or switch routers it could happen.
So when setting static IP addresses, take a look into your network’s settings and assign addresses outside of the DHCP pool’s range. This will help prevent the possible scenario i just mentioned above.

The next screen shows your current network settings and confirms that you want to use it as your static address. Click ‘Yes’.

The next screen is just a warning of what could happen with an IP conflict if the RPi does not have a static IP address and is using DHCP. We’re all set though using a static IP, so click ‘Ok’.

Next we will choose the user which we’ll install PiVPN under…
Click ‘Ok’.

Then choose the desired user, and click ‘Ok’ again.

We want to install WireGuard. So on this screen, select it and click ‘Ok’.

*If you need, or wish, to install OpenVPN to meet you needs then that option is available. My recommendation – If this is your first time setting up a VPN, stick with the default – WireGuard.

Wait and watch the status bar complete….

Select your default port. I am going to leave mine set to the default value “51820”. Click ‘Ok’.

Confirm the port, click ‘Yes’.

Because PiHole is already install, PiVPN detects it and offers to set that as our desired DNS. This is what we want, so click ‘Yes’.

This next screen asks how we will be connecting remotely to our PiVPN.

Most of us do not have a static “external” IP given to us by our ISP. So with that in mind, we do not want to use the public IP address that is shown.

We want to use a Dynamic DNS (DDNS) service. The best example of this type of DDNS service is No-IP (noip.com). This type of service allows you to run a client within your network that will go out and check what your external IP is, and then update No-IP with that address any time it changes. Dynamically updating the DNS record that you have setup with the DDNS service provider.

Note: This DDNS value can be changed later if your DDNS public name ever changes, though you would need to update your user/client endpoints to use the updated name.

Since we already have DDNS set up, we will be chooseing “DNS Entry – Use a public DNS”. Click ‘Ok’.

Enter your DDNS public DNS name. Click ‘OK’.

Confirm your entry. Click ‘Yes’.

The generation of the encryption keys are the next step. Click ‘Ok’.

We will want to acknowledge the ‘Unattended Upgrades’ page. It’s just letting us know that we should enable this feature and have the RPi automatically check for and install security updated for us daily. Note, that it will not automatically reboot the RPi, so we’ll need to do that manually from time to time. Click ‘Ok’.

Click ‘Yes’

Wait and watch the status bar complete….

Click ‘Ok’. PiVPN has now been installed! Woohoo!!!
We will still need to add our users/profiles before we can log in.

Click ‘Yes’ to reboot your RPi. Then ‘Ok’ again to initiate the reboot.

Now we need to log into our router.
We will need to setup a port forwarding. We need to forward port 51820 to our Raspberry Pi.
This will allow traffic both ways between the Internet and your PiVPN.

Note: If you skip this port forwarding step, you will not be able to connect remotely to your PiVPN.

Next Article in this series: Part 4: Create a Full-tunnel user in PiVPN

Category: Linux, RaspberryPi, Raspbian, VPN | 5 Comments on Installing PiVPN
6 April 2020

Create a Full tunnel user in PiVPN

Typing “pivpn” will show you all of the available options of PiVPN.

Now that PiVPN is running, it’s time to add device profiles to the VPN and grant them the permissions they need to be able to connect.

Ideally you will want to create a new client account for each device that will be connecting remotely to your VPN. This is a best practice, and my recommendation. It gives you the granular control, per device, in case you need to revoke or regenerate a device’s credentials. It’s easier to redo one device then it is to redo every device.

To add your user, type the following command below.

pivpn add

Then add the name of your user.
In my example, my user is named “P-W-W-F”

Just like that you’ve added a user to your VPN!

Repeat the above steps as many times as necessary to add profiles for every device that will be connecting to your VPN.

This default setup will create a user with a “full” VPN, meaning that all of their traffic is going to get routed thru the Internet over to your RPi. Your RPi will then determine what traffic is meant for your home network, and anything else will get re-routed back out of your home network to the Internet.

The config can be copied to the home config directory if you choose. This will make it easier if you are going to manually transferring a config file to a device

To copy or backup your configuration files use the following command:

cp /etc/wireguard/configs/P-W-W-F.conf /home/pi/configs/P-W-W-F.conf

Next Article in this series: Part 5: Create a Split-tunnel user in PiVPN

Category: Linux, RaspberryPi, Raspbian, VPN | LEAVE A COMMENT
5 April 2020

Setup PiVPN Endpoint Device

So PiVPN is setup. We’ve added the user/client into PiVPN. Now we need to setup the endpoint so they can connect back to PiVPN.

When we set up PiVPN we had to make a choice. We had to choose whether we wanted to use WireGuard or OpenVPN for the “magic” behind our VPN. In my article, we set up PiVPN using WireGuard, which was the PiVPN default.

So… we are going to want to download and install the WireGuard client on our endpoint device(s). Go ahead and get the latest/greatest version of the WireGuard client for your Operating System directly from WireGuard.

https://www.wireguard.com/install/

I’ll go over how to add it via QR code on your mobile iOS device. As well as how to add it from a config file onto a Desktop PC.

Note: If you created both a full and split-tunnel VPN client/user, then you will need to repeat the steps below to add the second profile.

Mobile Devices

Using a mobile OS like Apple’s iOS or Google’s Android, or other system that can read a QR code is probably going to be the easiest way to setup the endpoint device with it’s PiVPN configuration and encryption keys.

On the RPi, it’s possible to use PiVPN to generate a QR code for each client/device that you setup. That QR code will hold all the info that WireGuard needs on the endpoint to properly configure it. Just remember to guard that QR code and keep it safe… as it is literally the keys to your Castle/Home Network.

On the RPi, enter the following command below:

pivpn -qr

PiVPN will then list the users you have created, and you can choose which user you want a QR code to be generated for.

In my example, I get the QR code for the user “P-W-W-F”

On your mobile iOS device, open the WireGuard app.
Tap “+” to add a new tunnel.
Then tap “Create from QR code”.

Your phone’s camera will open and allow you to scan the QR code.

Give the VPN connection a name when prompted. I used the name “PiVPN”.

Click “Allow” when prompted to allow WireGuard to “Add VPN Confiurations” to your device.

It will then proceed to auto-magically set everything up for you.
You’ll have a simple toggle available in the WireGuard app that you can use to enable/disable your VPN.

Desktop Devices

Setting up the WireGuard app on a desktop is not hard, but it’s not as easy as simply scanning a QR code. PiVPN will automatically generate a file that will contain the configuration and encryption keys for each user/client, as you create each of your users/clients. We just have to copy that file from the RPi on to our desktop.

When we create the user/client in PiVPN, it generated a file named “User/Client.conf” and placed in the RPi’s users’ home folder.

In my example below, when I created the user “P-W-W-F” it generated the file “P-W-W-F.conf” and placed in the folder “/home/pi/configs”.

From your Desktop, open WinSCP, and connect to your RPi.
On the RPi side, navigate to the folder that was listed when you created your user/client in PiVPN.
Copy that “User/Client.conf” file over to your desktop.

On your Desktop, open the WireGuard app.
Click on button to “Import tunnels(s) from file”.

Browse to the file you copied off of your RPi, and click ‘Open’.
It will load all of your settings. Click the ‘Activate’ button to turn on your VPN.

Your PiVPN VPN using Wiregaurd is now active. You are now connected to it and can access all of your resources safely and securely.
To disconnect, just click the “Deactivate” button.

Next Article in this series: Remove PiVPN user/client

Category: Linux, RaspberryPi, Raspbian, VPN | 4 Comments on Setup PiVPN Endpoint Device
5 April 2020

Installing Pi-Hole

Installing Pi-Hole is really simple. In fact it only takes entering one line to setup.

curl -sSL https://install.pi-hole.net | bash

By running the above command essentially piping the curl command to bash, the RPi will automatically download and run PiVPN.

A cautionary note about piping curl to bash – Basically, be sure you trust the source, because you’re essentially letting them run whatever they want on your device!

You’ll see it start to load

Then you’ll have a few informational screens to click “Ok” through.

Note: Consider donating to Pi-Hole to keep the Pi-Hole project going – https://pi-hole.net/donate/

https://pi-hole.net/donate/

On this screen you choose the upstream DNS provider we want to use.
I’m going with Cisco’s OpenDNS, but can choose which ever you want.

Any of them are better then using your default ISP’s DNS. Regardless of what anyone tells you, none of them on this list are really that much better than any other. Yes, they each have a few different features that you’ll need to look into. But, let me be truthful with you, whichever one you do decide to choose it really just boils down to your personal preference. And… the best part is that you can easily change it anytime you want to use a different upstream DNS provider in the admin console, post-install.

Come back revisit this after you’ve gotten Pi-Hole up and running:
When you are ready to dive deeper down into the DNS hole, take a look at Steve Gibson’s DNS benchmark. Apparently one of the biggest considerations to take into account when choosing “the best” DNS is speed, and that is a metric which IS totally location dependent. He has an interesting tool that can help you run benchmarks against multiple DNS providers to see whom is “the best” for you.

Select the block lists you want to use.
I’m just leaving it default with all of the lists selected. These can all be changed (enabled/disable) later in the web admin interface.

Select which protocols (IPv4 and/or IPv6) that you wish to block ads on.
I’m leaving them both selected, which is the defaulted selection. These values can be changes later.

The next screen shows the RPi’s current IP address.
Mine is currently using a DHCP IP address, but we want set it to a static address. So I am going to click “No” here.

This screen is where the desired static IP address, and subnet mask (in CIDR format) gets set.
Your network will likely be different than mine, I’m setting mine to use the IP address 192.168.1.254.
As for the subnet mask, in most scenarios you can just use “/24”. That is CIDR shorthand for 255.255.255.0 and is basically saying that this subnet has 256 addresses in it; 192.168.1.0 to 192.168.1.255.

On this screen we enter the gateway.
This will most likely be your router’s IP address.
Mine is 192.168.1.1.

This screen shows us our updated settings.
Click “Yes” to accept the values you have entered.

Yes, we wish to install the web admin interface.

Yes, we wish for the web server to be installed and enabled.

Yes, we wish to log queries.

I want to see EVERYTHING!
You can change this to what you prefer. These will be the statistics you can see on the web admin interface. This value can get changed later from the web admin interface.
More info about this at: https://docs.pi-hole.net/ftldns/privacylevels

Pi-Hole will finish applying all of the settings it’s collected…

And then you are done. You did it!

The last screen of the Pi-Hole setup will show you the IP address and the URL for the web admin interface, as well as the admin password.

Press “Enter” to exit the installer and return to the command line.

Make your Pi-Hole the DNS of your network

Log into your router.

Navigate to it’s settings and clear any values that are currently set as it’s DNS.

Now enter the IP address of your Pi-Hole.

That’s it. Your network is now using Pi-Hole for all of it’s DNS queries.

Viewing your Network DNS Queries

Open a web browser and go to either the IP address of your RPi, or enter “pi.hole” as the URL.
In my example, I am either going to enter either “192.168.1.254/admin” or “pi.hole/admin”

That will load the Pi-Hole Web Admin Interface. Go ahead and click that login button. You’ll get even more details about what devices are doing on your network.

Pi-Hole does have some more advances features available in it that can allow it to act as your network’s DHCP server, on top of already serving up DNS. However I’ll save that for another time though…. For now, just sit back and enjoy fewer ads.

If you happened to this post by following my series about PiVPN, then click the following link to go to the next step: Part 3: Installing PiVPN

Category: DNS, Linux, RaspberryPi, Raspbian | LEAVE A COMMENT
5 April 2020

Enabling SSH on Raspberry Pi

Raspbian ships with the SSH server disabled by default. Which is an excellent security baseline. However if you want to be able to remotely connect to your RPi, you’re going to need to enable it. Thankfully, it can be manually enabled from the desktop very easily.

Note: When enabling SSH on a Pi, or any device, you should change its default password to ensure that it remains secure. Especially if you are connecting that device to the internet.

These instructions are straight from the RPi documentation (which can be found here).

Launch “Raspberry Pi Configuration” from the “Preferences” menu
Navigate to the “Interfaces” tab
Select “Enabled” next to “SSH”
Click “Ok”

Alternatively, raspi-config can be used in the terminal:

Enter “sudo raspi-config” in a terminal window
Select “Interfacing Options”
Navigate to and select “SSH”
Choose “Yes”
Select “Ok”
Choose “Finish”

Alternatively, use systemctl to start the service

sudo systemctl enable ssh
sudo systemctl start ssh

The one special use case regarding enabling SSH that is not covered above is running your RPi “headless”. Which simply means that you are using the RPi without a display plugged into it.

For headless setup, SSH can be enabled by placing a file named “ssh”, without any extension, onto the boot partition of the SD card from another computer. When the Pi boots, it looks for the “ssh” file. If it is found, SSH is enabled and the file is deleted. The content of the file does not matter; it could contain text, or nothing at all.

If you have loaded Raspbian onto a blank SD card, you will have two partitions. The first one, which is the smaller one, is the boot partition. Place the file into this one.

Now you can use your favorite SSH tool to console into your Raspberry Pi device remotely.

I mostly work on Windows machines, and my go to SSH tool is called “Putty“. However, there’s LOTS of different SSH programs out there.
So… do some googling, try a few, and use whichever one you like best.

Going headless? See my article on setting up WiFi on a headless RPi

If you happened to this post by following my either of my series about Pi-Hole or PiVPN, then click the following link to go to the next step: Part 2: Installing Pi-Hole

Category: Linux, RaspberryPi, Raspbian | LEAVE A COMMENT
30 November 2019

Stop the Ads @ Home – Pi-Hole

Advertising, love it or hate it, truly drives the internet. It is scary the amount of data companies skim about you from the ads that get served to and what you click onto. But with the right tools, you can do a lot to protect your privacy. One of the best thing you can do at home to protect your privacy and those stop unwanted ads, is to deploy Pi-hole.

As described on their homepage Pi-hole is “A black hole for Internet ads”, that is “Easy-to-install”, and “is a DNS sinkhole that protects your devices from unwanted content”. All of which can be done in a one-time setup, usually on a RaspberryPi, without installing any software on your devices.

Pi-hole acts upon your network. It takes on the role of serving as the DNS on your network, and optionally role of a DHCP server.

In most homes today, both of these roles are usually preform by your router/wifi access point. DNS, in its’ most simplistic terms, acts as the whitepages that helps your devices translate a URL to an IP addresses. DHCP allows your device to get a ‘dynamically’ assigned address on the network so that it can communicate with everythign else. So by utilizing some whitelists and blacklists, the PiHole can simply not serve the address to known advertising URLs. Cutting the ads off before the request ever leaves your house.

I’ve been using it at home for about 3 years now and absolutely love it. There are some ads that still come thru, and sometimes if I click on an ad, I’ll get a “page can’t be reached” message. It was different at first to get used to, but now… I would trade it for the world!

Another great piece of software to install on you RPi is PiVPN. It’s an easy and secure way to create a VPN (a private tunnel) to your home when you are out and about. The best part about it is that it can allow you to use Pi-Hole when your not at home. Check out my article here.

Category: DNS, Linux, Networking, RaspberryPi, Raspbian | LEAVE A COMMENT